Sprayon

Appearance:	SILVER GRAY
Odor:	NA
Specific Gravity:	0.87
Percent VOC:	48.6
VOC Compliant (CA and OTC States):	Y
Flash Point:	<0˚F
Flammable:	Y
HMIS:	2,3,1
Fill Weight:	14
Size UOM:	oz
Sheen:	MEDIUM GLOSS
Solids:	27.6
Dry to Touch (Minutes):	10-15
Dry to Handle (Minutes):	60
Recoat:	2 TO 16 HOURS OR AFTER 36 HOURS
Can Type:	Aerosol

Remove all rust, scale, paint, grease or foreign matter. A good clean surface is necessary. Apply directly to dry metal or galvanized surface and not over any other paint or coating. Product should be sprayed in a well-ventilated area. Use at room temperature (70°F.) for best operation. Turn can upside down. Hit sides lightly while rotating can in 1⁄4 turns until agitator ball breaks loose. While holding can upright, alternately shake the can up and down and in a circle for 30-60 seconds until the agitator travels freely in the bottom. NOTE! INSUFFICIENT MIXING MAY CAUSE PLUGGING TO OCCUR. Press spray button firmly with the can 8” to 12” away from surface being coated. Move can with short dusting strokes, releasing button at the end of each stroke. Apply several thin coats. For maximum performance in a highly corrosive environment, a topcoat is required. To prevent clogging, hold can upside down and spray until only clear gas comes out.

Uses: refineries, wrought iron, welds, power plants, fences, farm equipment, gutters, automotive, bridges, marine, nuclear facilities, highway maintenance, structural steel, transmission towers, damaged galvanized surfaces